Testimonials

What doctors say about Orchestrate 3D

I love the ability it gives me to control everything in the aligner process!

I have been using Orchestrate 3D software and their in-office printers since 2014. Their system allows me to do all my retainers, and aligners in the office. The retainers and aligners we produce are always dead on accurate and fast. Dr. Todd and their service team are second to none and Carter, their printer guru, is the smartest guy on the planet. I love the ability it gives me to control everything in the aligner process!

profile-pic
Dr. Christian Kenworthy
Orthodontist

This is an elegantly simple system, and the cost savings is substantial.

I’ve used Orchestrate 3D for the last 4 years and I am very pleased with it. When clear aligner therapy is indicated for our patients, I’m confident that good results will be achieved with this system. The software is easy and intuitive, and the company is staffed with people who are very knowledgeable professional. After acquiring an intra-oral scan and submitting it to Orchestrate, the virtual models are often ready and sent back to me within 24 hours. I then stage the movements that are needed, and printed models are sent to me within two weeks. We fabricate the aligners ourselves, and we keep the printed models in case an aligner is lost. This is an elegantly simple system, and the cost savings is substantial.

profile-pic
Dr. Mark Bellard
Orthodontist

has changed my practice dramatically

Orchestrate 3D has changed my practice dramatically. Those tough torquing movements of upper lateral incisors and cuspids are simple with Orchestrate but can waste months of treatment time with fixed appliances. When I have patients with extended treatment with braces who are frustrated with their slow pace of treatment and “just want the braces off”, I can most often complete their treatment with Orchestrate aligners and remove their braces. This approach to extended treatment has been a huge practice builder. Also, relapse of lower incisor crowding is easy and quick to resolve with aligners. As I treat more patients with Orchestrate aligners, I have gained much skill and can move teeth easily and quickly now that I have learned to use the system. There is a small learning curve but it is worth the effort to be able to treat patients with the Orchestrate system. Patients love the aligners since they are clear and comfortable. I would highly recommend the product and feel that all orthodontists should have Orchestrate as part of their armamentarium for patient care.

profile-pic
Dr. Warren Woods
Orthodontist

I estimate it has saved me over $50,000 in aligner lab fees

Since I started using Orchestrate last year, I estimate it has saved me over $50,000 in aligner lab fees as well as generated me an extra $30,000 in revenue from patients who would have otherwise not been able to afford clear aligner treatment with other systems. With Orchestrate, I can make treatment adjustments on the fly, refine cases as often as I like and treat simple cases with clear aligners predictably and at a better price point

profile-pic
Dr. Page Hudson
Orthodontist

I estimate it's saved me $250,000 in lab fees over the past two years.

I began using Orchestrate 3D two years ago. It's my secret weapon - I can treat simple cases, relapse and phase II with removable appliances now with a very low lab fee. I estimate it's saved me $250,000 in lab fees over the past two years.

profile-pic
Dr. Andrew Trosien
Orthodontist

I went from starting about one new case a month to, currently, about 12 cases a month

It’s hard to believe that it has been a little less than 14 months ago when I came out to California and met with Dr. Todd Ehrler and his staff for our training with the Orchestrate software and 3D printing. My goal was to reduce the expense to my office for the ability to treat our patients with the “clear aligner” system and that I would have more control over regarding tooth movement and aligner fabrication...Since we started offering clear orthodontic aligners, the response has been ridiculous. Never in my wildest dreams did I think this would happen. I went from starting about one new case a month to, currently, about 12 cases a month. I know that sounds too good to be true, but to be fair, we did reduce our cost for full mouth orthodontic treatment. Instead of sending $1800 to a company to design and make our clear aligners, we now spend about on average, $4 a tray (40 trays for total treatment, upper and lower arches, $320), which has allowed us to lower our fee and still remain profitable. This, in turn, has made orthodontic services available for more people who just couldn’t afford the typical $5000 + cost for this service...I can honestly say that our bottom line is around $20,000 a month of PROFIT. Not just increased production. I am very grateful that Orchestrate has this new technology which I believe allows all dentists to deliver better quality and better results orthodontic services.

profile-pic
Dr. Michael White
Orthodontist

It takes me under 30 min from scan time to setup a case

I have been using Orchestrate software for over a year now. Practicing in Beverly Hills, I have many high profile and demanding patients. Using Orchestrate allows me to design my own treatment plan and move teeth the way I want to as an orthodontist, not relying on a technician.

I have done over 100 cases and you can imagine how much of a lab fee it has saved the practice. It takes me under 30 min from scan time to setup a case ready for 3D printing using Juell2 3d printer. The training and the level of support has been incredible. They are located in California and are one phone call away. I picked their package after one year of research considering other softwares made in Europe. I made the right choice.

profile-pic
Dr. David Zinati
Orthodontist

a game changer for our practice and our patients

Orchestrate has been a game changer for our practice and our patients. We can use aligner trays made in our office to help patients straighten their Smiles and save lab expenses. We have even used aligners for 8-10-year-old Phase I treatment at night with great success for the patients and parents. Printing aligners as we need them is the only way to go for use with the mixed dentition. And of course, in-house aligners are perfect for “retainer rehabilitation” when there is post ortho relapse. It’s an inexpensive alternative to bite correction when you have had braces in middle school and want to use aligners as an adult.

profile-pic
Dr. Chris Payne
DDS

it has produced well over $500,000 in savings

Since I began using Orchestrate three years ago, it has produced well over $500,000 in savings and increased revenue. I have so many uses for O3D that I am recommending it daily. It's so much more cost effective than other aligner systems in many cases.

profile-pic
Dr. Barry Rosenberg
Orthodontist

an important addition to my arsenal of orthodontic treatment modalities

I have practiced orthodontics in the Houston, TX area for 25 years. I've used the Orchestrate system for several years now. Utilizing Orchestrate system I have observed excellent results in space closure, minor rotation and alignments issues, and treatment of minor orthodontic relapse with excellent patient acceptance. The O3D system is an important addition to my arsenal of orthodontic treatment modalities.

profile-pic
Dr. Billy Powell
Orthodontist

We have significantly increased our profitability

Orchestrate 3D has helped us reduce the costs of creating aligners for our office and for our patients. We have significantly increased our profitability while producing outstanding results!

profile-pic
Dr. Dale J Davis
Orthodontist

Leave a Review

What was your experience with our product like?
>